Flexible Automated Testing Solutions for Syringes and Cartridges to ISO Standards

A wide range of different syringes are used in the medical and pharmaceutical industry – from single-use and pre-filled syringes with needlestick protection to multi-chamber syringes. Automation of the test sequence can be useful to achieve higher test volumes and to minimize operator influence. In this webinar, you will learn about different levels of ZwickRoell’s flexible automated testing solutions.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Erik Berndt, Industry Management Medical & Pharmaceutical
  • Date: October 6, 2020  
  • Watch the recording of the webinar

Korean Webinar / 한국어 웨비나

  • 2020년 10월 20일, 10:00 - 11:00 a.m. (KST)
  • 등록

Testing Autoinjector and Pen Systems for Patient Safety

Needle-based injection systems (NIS) such as pen systems and autoinjectors allow precise dosing of drugs, self-injections by the patients and administration of higher volumes over a defined period of time. The complexity of these NIS-systems is constantly increasing. Within this webinar, you will learn how testing of all relevant functions is crucial for product quality and ultimately the safety of the patient.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Erik Berndt, Industry Management Medical & Pharmaceutical
  • Date: October 7, 2020 
  • Watch the recording of the webinar

Testing Connectors According to the New ISO 80369

Small-bore connectors are widely used in the medical and pharmaceutical industry. The new ISO 80369 standard that replaces ISO 594 now describes a wider range of small-bore connector systems and the appropriate test setup. In this webinar, you will learn about the new standard requirements regarding reference connectors and preparation of the specimen with connectors under axial and torsional load, as well as the different tests also under positive and sub-atmospheric pressure.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Erik Berndt, Industry Management Medical & Pharmaceutical
  • Date: October 8, 2020 
  • Watch the recording of the webinar

The Differences in Testing Catheters and Stents in R&D vs. QA

New materials and technologies are the drivers for future growth in the catheter and stent market. For development, material data of stents for numerical simulations are needed or the pushability of catheters in narrowed vessels must be improved. Testing in production is essential for ensuring the highest product quality and ultimately the safety of the patient. In this webinar, you will learn about the differences in testing catheters and stents in R&D vs. quality assurance.
  • Presented by: Erik Berndt, Industry Manager Medical & Pharmaceutical, Peter Schmidt, Product Manager Medical & Pharmaceutical and Mike Brooks, Regional Sales Manager
  • Date: October 13, 2020 
  • Watch the recording of the webinar

Validating Testing Systems with ZwickRoell Solutions

The medical and pharmaceutical industry is heavily regulated by laws and regulations. Traceable and tamper-proof test results, as well as completed validation and qualification activities, must be in place to demonstrate compliance. In this webinar, you will learn about ZwickRoell’s software and service solutions to become compliant.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Manfred Goblirsch, Senior Sales Engineer
  • Date: October 15, 2020 
  • Watch the recording of the webinar
WebinareMedizin6 neu

An In-depth Look at the Testing of Biomechanics & Orthopedics

An elderly population and advancements in technologies are drivers for future growth of the biomechanics and orthopedics market. Static and fatigue testing of biomechanics & orthopedics is crucial for developing new products and ensuring highest product quality. Within this webinar, you will learn about ZwickRoell’s ready-made testing solutions, with a special focus on hip implants.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Johannes Künstler, Sales Manager for Fatigue Testing Machines and Special Machines
  • Date: October 20, 2020 
  • Watch the recording of the webinar

PPE and Medical Textile Testing for the Covid-19 Pandemic

Covid-19 still has a big influence on our daily lives and on the availability of Personal Protective Equipment (PPE) and other medical textiles. Quality control and approval testing of these products is essential for product quality. Within this webinar, you will learn about ZwickRoell’s ready-made testing solutions for PPE and medical textiles.

  • Presented by: Jochen Niederberger, Industry Management Medical & Pharmaceutical and Erik Berndt, Industry Management Medical & Pharmaceutical  
  • Date: October 22, 2020 
  • Watch the recording of the webinar
Top