Welcome to ZwickRoell - Intelligent Testing

Industries⁽¹³⁾

• Plastics

  Plastics

  We are experts in all test types and in standard-compliant testing, and we offer the ideal testing machines and systems for the plastics industry.

  • More information

  • ArabPlast

    05.01. - 08.01.2019 UAE - Dubai

    ArabPlast, the largest trade expo for plastics, petrochemicals and rubber industry in the MENA region, is set to bring together key players and experts in the sector from around the world in Dubai.

  • Hyperloop competition by Elon Musk – Winning team's wheels tested with ZwickRoell

    The Hyperloop is a mobility concept proposed by Tesla founder Elon Musk, in which high-speed trains would travel at nearly the speed of sound at approximately 1,100 km/h, through tubes with extremely low air pressure. By using battery electric powered transport capsules known as pods, traveling from Munich to Berlin could take only 30 minutes in the future.

  • Products for plastics testing

• Metals

  Metals

  Here you will find comprehensive information about standard-compliant materials testing with ZwickRoell testing systems for all segments of the metals industry.

  • More information

  • Voestalpine relies on ZwickRoell for sheet metal testing

    The forming limit curve (FLC) is an important parameter for sheet metal simulations of autobody metals.

  • Products for standard-compliant metals testing

• Automotive

  Automotive

  Read more about our testing machines and testing systems for materials and components and their test applications in the various branches of the automotive and supplier industries.

  • More information

  • Hyperloop competition by Elon Musk – Winning team's wheels tested with ZwickRoell

    The Hyperloop is a mobility concept proposed by Tesla founder Elon Musk, in which high-speed trains would travel at nearly the speed of sound at approximately 1,100 km/h, through tubes with extremely low air pressure. By using battery electric powered transport capsules known as pods, traveling from Munich to Berlin could take only 30 minutes in the future.

  • Products for the automotive industry

• Medical Engineering & Pharmaceutical Industry

  Medical Engineering & Pharmaceutical Industry

  Quality assurance in the medical engineering and pharmaceutical industry places the highest demands on testing technology in terms of hardware, software, and documentation. Read more about the various test types and testing machines and systems for the medical engineering industry.

  • More information

  • Pre-Filled Syringes & Injectable Drug Devices

    16.01. - 17.01.2019 UK - London

    Pre-Filled Syringes & Injectable Drug Devices Europe from 16th-17th of January 2019 in London

  • Pharmaceutical and Medical Industry Increasingly Demands Automated Testing Solutions

    After the manufacturing processes in pharmaceutical and medical industries reached a high level of automation in recent years, manufacturers are more committed to automating their testing processes as well.

  • Products for the medical engineering industry

• Academia

  Academia

  Here you will find comprehensive information about solutions for institutions of higher education and universities for research and training as well the latest on the ZwickRoell Science Award and Academia Day.

  • More information

  • University of Bern relies on laserXtens Compact HP for non-contact strain measurement

    29.06.2018

    The Institute for Surgical Technology and Biomechanics (ISTB) consists of multi-disciplinary research groups which collaborate with clinicians from the university hospital, and with both Swiss and international research partners from outside the university. The Musculoskeletal Biomechanics research group is interested in the hierarchical mechanical properties of human bones which are responsible for an increased risk of fracture in an aging population, particularly with diseases such as osteoporosis.

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • Testing additive manufactured structures for the aerospace industry at -269°C

    Additive manufacturing methods such as laser melting afford a great amount of design freedom and therefore offer huge potential for weight minimization. Due to the small quantities typical in aerospace this type of manufacturing method can also be implemented cost-effectively. KRP Mechatec relies on a testing machine from ZwickRoell for testing additive manufactured aluminum and titanium structures at low temperatures down to -269°C .

  • teachXpert - the lecture-room testing machine

    ZwickRoell's teachXpert is a complete, mobile testing machine for use in classroom or lecture theater. 

• Textiles

  Textiles

  ZwickRoell has developed testing machines, accessories, and specimen grips specifically for the textile industry. The numerous applications and the demanding requirements placed on these textiles, in particular in research and development, underscore the need for cutting-edge testing solutions.

  • More information

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • TU Chemnitz to use new ZwickRoell testing system for future research

    The multiaxial servo-hydraulic testing system is designed for predominantly dynamic loading of components, assemblies and power-transmission mechanisms used in materials handling.

  • Products for textile materials testing

• Paper & Cardboard

  Paper & Cardboard

  Read more about standard-compliant testing of paper-based materials and the testing machines and test tools ZwickRoell has developed specifically for this industry.

  • More information

  • Testing corrugated board safely and efficiently - DS Smith uses ZwickRoell for materials testing

    21.11.2018

    DS Smith is a leading European manufacturer of customer-specific packaging and displays. With a product portfolio spanning transportation packaging, consumer goods packaging, display and promotion packaging, as well as customized protective and industrial packaging, DS Smith fulfills the requirements of all markets. For materials testing at its location in Margarethen (Austria), the company uses a testing machine from its trusted supplier, ZwickRoell, based in Ulm, Germany.

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

• Food & packaging

  Food & packaging

  Everything you need to know about texture analysis, viscosity measurement, and package testing including our product portfolio for the food industry.

  • More information

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • Safely Packaged – Südpack Relies on Testing Technology from ZwickRoell

    The Südpack Packaging Group is one of the leading manufacturers of soft and hard films, flexible plastic composites and bags in Europe. To meet the high quality standards necessary for their products, the company employs two zwickiLine testing machines in their quality control.

  • Products for food testing

• Mechatronics & Electronics

  Mechatronics & Electronics

  Electronics and mechatronics are the most important drivers of innovation in the automobile. Read more about their applications and ZwickRoell testing machines developed specifically for this industry.

  • More information

  • Securely connected – Cable manufacturer relies on testing technology from ZwickRoell

    05.11.2018

    Austrian-based Feller GmbH, is an internationally successful, mid-sized, family-owned company in the electrical industry. Feller GmbH's core products are power cord assemblies for electronic devices used in a wide range of industries. 10% of the company's annual sales is invested in research and development. Among its R&D activities, Feller decided to use a portion to purchase a testing machine from ZwickRoell.

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • Airbag connection safety ensured by intelligent testing system

    To ensure fault-free deployment of vehicle airbags it is essential that the plug connectors used function correctly. For testing these, Delphi Connection Systems uses electrical and optical measurement and testing equipment supplied by ZwickRoell, with fast, reliable test-data processing provided by the testControl II measurement and control technology.

  • Products for mechatronics & electronics testing

• Building materials

  Building materials

  Learn more about applications in the construction industry and ZwickRoell's testing solutions for concrete, cement, and bonding agents, as well as those for testing asphalt, glass and ceramics, and wood.

  • More information

  • Innovative testing system for concrete-reinforcing steel

    07.12.2018

    Reinforcing steel and ribbed reinforcement bars (rebars) are so vital to civil engineering they form a group of important structural materials, which in the case of concrete-reinforcing steel, are subject to regulatory control. ZwickRoell offers testing solutions to perform tensile tests up to 5,000 kN on concrete-reinforcing steel.

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • Products for the construction industry

• Springs

  Springs

  Read more about applications and testing systems for spring testing.

  • More information

  • On the right track ZwickRoell delivers testing system to Bombardier Transportation

    25.05.2018

    Rail transport is one of the safest modes of transport in the world. Train manufacturers must comply with strict safety requirements when designing locomotives, multiple-unit trains, and freight cars. This especially applies to railcar bodies and undercarriage structures. For function testing of various spring systems, Bombardier Transportation selected a testing machine from ZwickRoell.

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • 56 at a stroke - new dynamic spring testing system for Scherdel

    The Scherdel Group is based in Marktredwitz, in the Oberfranken region of Germany, and is a leading supplier of springs to the automotive sector. The group's products cover a range including compression springs, valve springs and complete spring assemblies. The increasing importance of dynamic tests for quality control, in addition to static compression and tensile tests, means that the company will be using a ZwickRoell servo-hydraulic machine in future.

  • Products for spring testing

• Composites

  Composites

  Here you will find comprehensive information about standard-compliant test methods and ZwickRoell testing machines and systems for the testing of composites.

  • More information

  • JEC World

    12.03. - 14.03.2019 FR - Paris

    The largest international gathering of composites professionals

  • R-Tech Materials invests in composites testing machine from ZwickRoell

    The Boeing Dreamliner is made up of over 50 percent fiber-reinforced composites and interest in composites is steadily increasing, even in industries outside the aerospace industry. As a result of this growth, the demand for testing is also continually increasing. In order to meet the increased demand and requirements in the future, the British testing laboratory R-Tech Materials opted for a composites testing machine from ZwickRoell.

  • AllroundLine for individual testing requirements and all applications

    The optimum solution for demanding testing applications, whether in quality control or for research projects.

• Solar

  Solar

  Tremendously high quantities, long life expectancy, and very few to no testing guidelines— this is the current situation in the photovoltaics industry. Testing is essential for companies who want to remain players in this fiercely competitive market and achieve the promised performance data and life expectancy while offering the lowest prices. Read more about applications and ZwickRoell testing systems.

  • More information

  • Control

    07.05. - 10.05.2019 DE - Stuttgart

    Control – International trade fair for quality assurance

  • Good connection! Multi-Contact uses ZwickRoell testing system

    Multi-Contact is the world's leading manufacturer of electrical plug connectors and contact systems. As well as industrial applications, the company's products are used primarily in the automotive sector, in automation, medical engineering, solar energy and testing and measuring technology. This means that Multi-Contact products must satisfy the highest standards for quality and operational reliability. In its product development and quality assurance activities Multi-Contact is supported by ZwickRoell testing systems.

  • AllroundLine for individual testing requirements and all applications

    The optimum solution for demanding testing applications, whether in quality control or for research projects.