Among the most important classical design elements are springs, in which the elastic properties of materials are exploited for energy storage and conversion. Without springs—regardless of their design—no mechanical or electro-mechanical system would operate. The main functions of engineering springs are
ZwickRoell offers special solutions for the most varied spring systems.
Rapid technical advance has led to a significant increase in the demands placed on the accuracy and durability of springs. The corollary of this is greater demands on manufacturing accuracy due to ever-smaller dimensional, form, and positional tolerances, with similarly enhanced requirements for testing technology.
The zwickiLine (single-column testing machine) with testControl II electronics, together with the precision spring compression test kit, is ideally suited for use as a precision spring testing machine. The kit is extremely transverse force-resistant and protects against overload. The ground, demagnetized compression platens have a parallel alignment of 1 µm/10 mm and precision guides permit only precise vertical movement of the compression platens. Measuring errors caused by deformation or lateral forces of the springs are reduced to a minimum thanks to the extremely stiff load cell, which is resistant to transverse forces.
This testing system supports quality assurance and the development of pneumatic springs. It consists of a floor-standing testing machine with Fmax 250 kN. It is equipped with an additional horizontal, electromechanical drive with Fmax 50 kN and a force measuring platform with five load cells (3 vertical and 2 horizontal). The axial and horizontal stiffness characteristics of pneumatic springs are determined under vertical, horizontal or combined loading, and the following channels can be individually controlled:
For easy insertion of the specimen, the system is equipped with a loading table that can be used to push the specimens into the testing machine.