Extensometers Are a ZwickRoell Core Competence

Return to product overview

Downloads

Product brochure: Extensometers
Product brochure: Specimen grips and test tools
Product information: Hydraulic distribution unit
Product information: Hydrostatic single testing actuator 10-50 kN
Product information: Hydrostatic single testing actuator 100-1000 kN
Product information: 20 l/min. hydraulic power-pack
Product information: 40 l/min. hydraulic power-pack
Product information: 80 l/min. hydraulic power-pack
Product information: 170 l/min. hydraulic power-pack
Product information: 2-point flexure test kit
Product information: 3-point flexure test kit to ISO 178 and ASTM D790
Product information: 3- and 4-point flexure test kit for fiber composites
Product information: 90° peel test kit to DIN 40802, DIN 53278, DIN 53494
Product information: 90° tape peel test kit
Product information: Holder for retaining hypodermic needles with Luer taper
Product information: Mounting unit for tack loop tests
Product information: Alignment fixtures, Fmax 50 kN to 250 kN
Product information: Jaw inserts for specimen grips
Product information: Burst test kit
Product information: Butter cutter
Product information: CAI compression test kit (Compression After Impact)
Product information: digiClip
Product information: digiClip biax
Product information: digiClip transverse
Product information: Strain gage clip-on extensometer
Product information: Biaxial strain gage clip-on extensometer
Product information: Extensometer for testing plastic pipes
Product information: Long-travel extensometer
Product information: ProLine longstroke
Product information: zwicki longstroke
Product information: laserXtens 1-15 HP
Product information: laserXtens 2-220 HP
Product information: laserXtens 7-220 HP
Product information: lightXtens, basic and fully automated
Product information makroXtens II extensometer
Product information: ProLine makro extensometer
Product information: Marking methods for videoXtens
Product information: multiXtens extensometer
Product Information: videoXtens 1-120
Product Information: videoXtens 1-270
Product Information: videoXtens 2-120 HP
Product Information: videoXtens 3-300
Product information: Displacement transducer for 3- and 4-point flexure tests and compression tests
Product information: Indenter for testing flexible foams
Daily Check
Product information: Lid peel test kit for peelable packagings
Product information: Double ring flexure test kit
Product information: Compression die for texture analysis
Product information: Hydraulic compression test kit for composites (HCCF)
Product information: ProLine compression test kit
Product information: Compression test kit for end loading force application
Product information: Puncture device
Product information: Puncture device for tissue products
Product information: Geotextile puncture device
Product information: Self-aligning specimen grip for medical components, Fmax 500 N
Product information: Puncture needle for texture analysis
Product information: Spring loaded grips, Fmax 50 N
Product information: Spring loaded grips, Fmax 20 N
Product information: Toggle grips, Fmax 300 N/2.5 kN
Product information: GripControl hydraulic power pack
Product information: Universal hydraulic power pack
Product information: Hydraulic specimen grips for geotextiles, Fmax 50 kN / 100 kN / 250 kN
Product information: Hydraulic grips with large opening, Fmax 10 kN
Product information: Hydraulic grips, Fmax 50 kN
Product information: Hydraulic grips for short clamping lengths, Fmax 50 kN / 70 kN
Product information: Hydraulic grips for short clamping lengths, Fmax 150 kN / 250 kN
Product information: Hydraulic grips, Fmax 100 kN / 250 kN
Product information: Hydraulic grips for body over wedge, Fmax 100 kN
Product information: Hydraulic grips for body over wedge, Fmax 250 kN
Product information: Hydraulic grips, Fmax 50 kN
Product information: Hydraulic grips, Fmax 100 kN / 250 kN
Product information: Wedge grips, Fmax 2,5 kN / 5 kN
Product information: Wedge grips, Fmax 10 kN / 20 kN
Product information: Wedge grips, Fmax 10 kN / 50 kN
Product information: Wedge grips body over wedge, Fmax 10 kN
Product information: Wedge grips, Fmax 30 kN / 50 kN
Product information: Wedge grips body over wedge, Fmax 50 kN
Product information: Wedge grips, Fmax 100 kN
Product information: Wedge grips body over wedge, Fmax 100 kN
Product information: Wedge grips, Fmax 150 kN
Product information: Wedge screw grips manual, Fmax 50 kN/100 kN/150 kN
Product information: Wedge screw grips manual, Fmax 250 kN
Product information: Wedge screw grips motorized, Fmax 250 kN
Product information: Wedge screw grips, Fmax 500 N / 2,5 kN
Product information: Wedge screw grips, Fmax 10 kN
Product information: Wedge screw grips, Fmax 10 kN / 30 kN
Product information: Ball burst test device
Product information: Strip cutter for plastic film
Product information: Automatic notch-cutting machine
Product information: Manual notching plane
Product information: Cutting press
Product information: Curve grips, Fmax 10 kN/20 kN
Product information: Fluid bath for medical testing applications
Product information: Specimen blanking machines
Product information: Mixed mode bending flexure test kit (MMB)
Product information: Needle puncture test fixture with variable test angle
Product information: Ottawa cell (OTMS cell)
Product information: Pneumatic grips for temperature chambers, Fmax 10 kN / 20 kN
Product information: Pneumatic grips for temperature chambers, Fmax 200N/2.5 kN
Product information: Pneumatic grips, Fmax 20 N
Product information: Pneumatic grips, Fmax 200 N
Product information: Pneumatic grips, Fmax 200 N/1 kN
Product information: Pneumatic grips with 180° deflector, Fmax 1 kN
Product information: Pneumatic grips, Fmax 1 kN
Product information: Pneumatic grips, Fmax 20 N / 50 N / 100 N / 200 N
Product information: Pneumatic grips, Fmax 1 kN
Product information: Pneumatic grips for temperature chambers, Fmax 1 kN
Product information: Pneumatic grips, Fmax 2.5 kN
Product information: Pneumatic grips, Fmax 2.5 kN
Product information: Pneumatic grips, Fmax 10 kN/20 kN
Product information: Pneumatic grips, Fmax 5 kN/10 kN/30 kN
Product information: Pneumatic grips, Fmax 50 kN
Product information: Pneumatic grips, Fmax 20 kN
Product information: Pneumatic grips, Fmax 100 kN
Product information: Pneumatic control unit (PC controlled)
Product information: Pneumatic foot control unit
Product information: Specimen grips for determination of short-span compressive strength
Product information: Specimen heater up to 400 °C for HT nanoindentation
Product information: Test fixture for mechanical testing of blind rivets
Product information: Test fixture for self-adhesive insulating tapes
Product information: Grips for ring specimens, Fmax 2.5 kN
Product information: Floating roller peel test device for high strength adhesive bonds
Product information: Back extrusion fixture
Product information: Kramer shear cell
Product information: Warner-Bratzler cutting fixture
Product information: Specimen grips for insulating material, Fmax 10 kN
Product information: Specimen grips for screws, shoulder and threaded head specimens, Fmax 50 kN/250 kN
Product information: Screw grips, Fmax 500 N/1 kN
Product information: Screw grips, Fmax 200 N
Product information: Screw grips, Fmax 200 N
Product information: Screw grips, Fmax 500 N
Product information: Screw grips, Fmax 1 kN
Product information: Screw grips, Fmax 20 N
Product information: Screw grips, Fmax 2.5 kN
Product information: Screw grips, Fmax 5 kN/10 kN
Product information: Screw grips, Fmax 20 kN
Product information: Rope grips, Fmax 2,5 kN
Product information: Rope grips, Fmax 2,5 kN
Product information: Rope grips, Fmax 10 kN / 50 kN
Product information: Rope grips, Fmax 100 kN
Product information: Rope grips, Fmax 100 kN
Product information: Die for texture analysis
Product information: Temperature chamber for the AllroundLine
Product information: Temperature chamber for the zwickiLine
Product information: Dough tensile test fixture
Product information: Drum peel kit for tests on sandwich constructions
Product information: Double capstan grips, Fmax 500 N
Product information: Special grips for yarn, Fmax 2.5 kN
Product information: Specimen grips for high-performance fibers, Fmax 2.5 kN
Product information: Pneumatic grips with 90° deflector, Fmax 1 kN
Product information: Pneumatic grips with 180° deflector, Fmax 5 kN
Product information: Specimen grips for textile tire cords, Fmax 2.5 kN
Product information: Specimen grips for steel tire cord to BISFA, Fmax 10 kN
Product information: V-notched beam (Iosipescu) shear test device
Product information: V-notched rail shear test kit
Product information: Fixture for GIC tests on long-fiber-reinforced composites
Product information: Fixture for determination of interlaminar shear strength (ILSS)
Product information: Fixture for notch compression tests (OHC/FHC)
Product information: Test fixture for determining breakaway force and glide force
Product information: Fixture for testing friction behavior precision compression springs
Product information: Roller grips, Fmax 2.5 kN
Product information: Roller grips, Fmax 50 kN
Product information: Roller grips, Fmax 100 kN
Product information: Roller grips, Fmax 100 kN/250 kN
Product information: Toolbox for components testing
Product information: Pincer grips, Fmax 500 N
Product information: Pincer grips, Fmax 2.5 kN
Product information: Pincer grips, Fmax 5 kN/10 kN
Product information: Grips for tension springs, Fmax 50 N/10 kN
Product Information: High-temperature furnace up to 1,250°C
Product Information: Extensometer for high-temperature and creep testing
Product Information: High-temperature extensometer up to 1.500°C
Product Information: laserXtens 1-32 HP/TZ
Product Information: Load string for creep tests up to 1,200°C
Product Information: Load string up to 1,200°C
Product Information: videoXtens 1-32 HP/TZ
Product Information: Ceramic load string up to 1,500 °C
Product Information: laserXtens 2-120 HP/TZ

News

29.04.2019

Optical extensometers: A closer look for a better view