Jump to the content of the page
English
Customer portal  Search
Contact

ASTM F2345 Cyclic Fatigue Strength of Ceramic Femoral Heads

Since being revised in 2021, the ASTM F2345 standard only covers the determination of the cyclic fatigue strength of ceramic modular femoral heads.

For now, when testing the static strength of ceramic modular femoral heads, laboratories refer to the test method specified in the ISO 7206-10 standard.

ASTM F2345: Scope and requirements

ASTM F2345-2021: Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads

  • This test method can be used to determine the effect of different head and cone materials, different designs and manufacturing processes on cyclic loading capacity.
  • For this, the standard describes two different dynamic test methods with a sinusoidal test frequency < 30 Hz.

Testing to ASTM F2345 with ZwickRoell

HC Compact servohydraulic testing machine Compact testing system with integrated hydraulic power pack
Test load
  • 10 kN - 100 kN
Type of test
  • Fatigue
  • Fracture mechanics
  • LCF
Standards
  • ISO 12106
  • ASTM E606
  • DIN 50100
  • ASTM E399
  • ASTM E647
  • ASTM E466
To the product
LTM electrodynamic testing machine
Test load
  • 1 kN - 10 kN
Type of test
  • Fatigue
  • Tensile
  • Compression
Standards
  • ISO 18489
  • ASTM F2193
  • ISO 14801
  • ASTM F1798
  • ASTM F1717
To the product
testXpert R Testing software for dynamic applications
To the product

If you are looking for the optimal solution for each of your requirements, please contact our industry experts.

Get in contact with our industry experts.

We will be happy to discuss your needs.

Contact us

You may also be interested in

Endurance properties testing stemmed femoral components and neck region of stemmed femoral components
ISO 7206-4, ISO 7206-6
Describes the high cycle fatigue test to ISO 7206-4 on the stemmed femoral components and ISO 7206-6 on the neck region of stemmed femoral components.
to Endurance properties testing stemmed femoral components and neck region of stemmed femoral components
Compression/pull-off test femoral head
ISO 7206-10
ISO 7206-10 specifies the requirements on the testing system for the determination of resistance to static load of modular femoral heads.
to Compression/pull-off test femoral head
Deformation test method acetabular shell
ISO 7206-12
ISO 7206-12 specifies a test method and the test conditions for determining short-term deformation of a press-fit acetabular component.
to Deformation test method acetabular shell
Torsion test femoral head
ISO 7206-13
ISO 7206-13 specifies a test method for the determination of resistance to torque between the femoral head and neck, or the stem.
to Torsion test femoral head
Forces for disassembly of acetabular shell / liner
ASTM F1820
The ASTM F1820 standard specifies different test methods for determining the forces for disassembly between the acetabular shell and liner
to Forces for disassembly of acetabular shell / liner
Tensile test femoral head
ASTM F2009
The ASTM F2009 standard specifies a test method for determining the required disassembly force of the taper connection between the femoral head and femoral shaft.
to Tensile test femoral head
Fatigue testing modular femoral stems
ASTM F2580
The ASTM F2580 standard specifies a test method for fatigue testing of metallic femoral stems with metaphyseal fixation.
to Fatigue testing modular femoral stems
Top