Jump to the content of the page
English
Customer portal  Search
Contact

ASTM F2009 Tensile Test on the Femoral Head

The ASTM F2009 standard specifies a test method for determining the required disassembly force of the taper connection between the femoral head and femoral shaft.

ASTM F2009:Scope and requirements

ASTM F2009-20:Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses.

  • A minimum of five tests should be run per head/cone type.
  • Before the test, the head and cone must be joined with a specified force analogous to ISO 7206-10.Preparation of the femoral head is also required to ensure correct fixation.

Testing to ASTM F2009 with ZwickRoell

AllroundLine Individual and versatile
Industries
  • Universal
Test load
  • 5kN - 250kN
Type of test
  • Tensile test
  • Compression test
  • Flexure test
Applications
  • Universal testing applications in a medium force range
To the product
Testing software testXpert Intuitive and workflow-based right from the start
Applications
  • All testing machines and instruments
Special feature
  • Flexible–from quality assurance to research & development Guaranteed standard compliance via more than 600 standard test programs
To the product

We look for and find the optimal testing solution for every one of your requirements.

Get in contact with our industry experts.

We look forward to discussing your needs.

 

Contact us

You may also be interested in

Endurance properties testing stemmed femoral components and neck region of stemmed femoral components
ISO 7206-4, ISO 7206-6
Describes the high cycle fatigue test to ISO 7206-4 on the stemmed femoral components and ISO 7206-6 on the neck region of stemmed femoral components.
to Endurance properties testing stemmed femoral components and neck region of stemmed femoral components
Compression/pull-off test femoral head
ISO 7206-10
ISO 7206-10 specifies the requirements on the testing system for the determination of resistance to static load of modular femoral heads.
to Compression/pull-off test femoral head
Deformation test method acetabular shell
ISO 7206-12
ISO 7206-12 specifies a test method and the test conditions for determining short-term deformation of a press-fit acetabular component.
to Deformation test method acetabular shell
Torsion test femoral head
ISO 7206-13
ISO 7206-13 specifies a test method for the determination of resistance to torque between the femoral head and neck, or the stem.
to Torsion test femoral head
Forces for disassembly of acetabular shell / liner
ASTM F1820
The ASTM F1820 standard specifies different test methods for determining the forces for disassembly between the acetabular shell and liner
to Forces for disassembly of acetabular shell / liner
Fatigue strength ceramic femoral heads
ASTM F2345
The ASTM F2345 standard covers determination of the static and cyclic fatigue strength of ceramic modular femoral heads.
to Fatigue strength ceramic femoral heads
Fatigue testing modular femoral stems
ASTM F2580
The ASTM F2580 standard specifies a test method for fatigue testing of metallic femoral stems with metaphyseal fixation.
to Fatigue testing modular femoral stems
Top