Materials Testing Machine with Hydraulic Drive

The H-series hydraulic materials testing machines have a single central hydraulic drive and are available in 600, 1200, 1600, 2000, 2500, 3000 and 5000 kN versions (60 - 500 tons).
H-series hydraulic materials testing machine

Key Advantages and Features

Advantages & features

  • Hydraulic materials testing machines have a single central hydraulic drive (differential actuator).
  • The materials testing machines are optionally equipped with an adjustable top crosshead to be able to adapt the test area to customer-specific requirements.
  • The ergonomic operating height facilitates easy feeding of specimens.
  • With the high resolution and channel-synchronized measurement technology, material characteristics are determined with extreme accuracy. Range-switching is not necessary as load signal resolution is available over the full range.
  • Force measurement takes place via a DMS load cell and is calibrated in accordance with ISO 7500-1 in Class 0.5 and Class 1.
  • The wide measurement range also allows low test loads to be determined precisely, with no need to re-equip the testing machine.
  • The testing machine is set on vibration damping rubber mats. A special foundation is not necessary.

Further advantages:

  • For standard testing with the ZwickRoell testXpert testing software, operator involvement is reduced to the push of a button.
  • Modular design throughout the system allows the entire ZwickRoell accessory range to be used, including a wide variety of extensometers, specimen grips and other test fixtures.
  • Should new testing requirements arise, additional test fixtures are easily installed via a T-slot or screw system.
  • The materials testing machine can be tailored to customer-specific requirements (e.g. test devices, specimen grips, test speed ranges, testing software).

Technical Overview

600 kN

Type

Z600H

Z600H

Item No.

358422

358423

Fmax

600

600

kN

Top crosshead

Fixed

Adjustable

No. of guide columns

2

2

Stiffness of load frame at Fmax (without specimen grips and load cell), approx.

600

600

kN/mm

Load-frame dimensions

H1 - height

2913

max. 3213

mm

B1 - width

1030

1030

mm

T1 - depth

500

500

mm

Test area dimensions

H1 - height

1578

max. 1878

mm

B2 - width

670

670

mm

H3 - max. stroke

500

500

Max. test speed

250

250

mm/min

Weight

without accessories (with electronics)

1870

1900

kg

with specimen grips

2470

2700

kg

Specific floor loading

1.5

1.5

kg/cm

Load cell accuracy class

0.5 from

12

12

kN

1 from

2.4

2.4

kN

Displacement resolution of drive

0.16

0.16

μm

Positioning accuracy

± 0.01

± 0.01

mm

1200 kN

Type

Z1200H

Z1200H

Item No.

358424

358425

Fmax

1200

1200

kN

Top crosshead

Fixed

Adjustable

No. of guide columns

4

4

Stiffness of load frame, crosshead flexing and lead-screw elongation, approx.

1200

1200

Load-frame dimensions

H1 - height

3411

max. 3769

mm

B1 - width

1100

1220

mm

T1 - depth

760

920

mm

Test area dimensions

H1 - height

1876

max. 2184

mm

B2 - width

850

850

mm

H3 - max. stroke

600

600

mm

Test speed

200

200

mm/min

Weight

without accessories (with electronics)

4050

4700

kg

with specimen grips

5350

6000

kg

Specific floor loading

1.6

1.8

kg/cm2

Load cell accuracy class

0.5 from

24

24

kN

1 from

4.8

4.8

kN

Displacement resolution of drive

0.16

0.16

μm

Positioning accuracy

± 0.01

± 0.01

mm

1600 kN

Type

Z1600H

Z1600H

Item No.

010207

643074

Fmax

1600

1600

kN

Top crosshead

Fixed

Adjustable

No. of guide columns

4

4

Stiffness of load frame at Fmax (without specimen grips and load cell), approx.

1600

1600

kN/mm

Load-frame dimensions

H1 - height

3661

max. 4414

mm

B1 - width

1210

1210

mm

T1 - depth

1015

1015

mm

Test area dimensions

H1 - height

2076

max. 2834

mm

B2 - width

800

800

mm

H3 - max. stroke

600

600

mm

Test speed

250

250

mm/min

Weight

without accessories (with electronics)

5000

5900

kg

with specimen grips

7200

8100

kg

Specific floor loading

2.1

2.4

kg/cm2

Load cell accuracy class

0.5 from

32

32

kN

1 from

6.4

6.4

kN

Displacement resolution of drive

0.16

0.16

μm

Positioning accuracy

± 0.01

± 0.01

mm

2000 kN

Type

Z2000H

Z2000H

Item No.

358426

750749

Fmax

2000

2000

kN

Top crosshead

Fixed

adjustable

No. of guide columns

4

4

Stiffness of load frame at Fmax (without specimen grips and load cell), approx.

2000

2000

kN/mm

Load-frame dimensions

H1 - height

4125

max. 4600

mm

B1 - width

1255

1400

mm

T1 - depth

905

1100

mm

Test area dimensions

H1 - height

2236

max. 2829

mm

B2 - width

850

850

mm

H3 - max. stroke

600

600

mm

Max. test speed

200

200

mm/min

Weight

without accessories (with electronics)

7100

8500

kg

with specimen grips

10800

12200

kg

Specific floor loading

3.2

3.6

kg/cm

Load cell accuracy class

0.5 from

40

40

kN

1 from

8

8

kN

Displacement resolution of drive

0.16

0.16

μm

Positioning accuracy

± 0.01

± 0.01

mm

Layout

Layout of H-series hydraulic materials testing machine
Top