Jump to the content of the page

Temperature Chambers

-80°C to +360°C Download
Temperature range
  • -80°C to +250°C
  • -80°C to +250°C
  • -50°C to +180°C
Load range
  • Up to 250 kN
  • Up to 2.5 kN
Advantages
  • Precise temperatures
  • Flexible extensometer integration
  • Flexible in use
  • Can be retrofitted
Industries
  • Universal

Temperature chambers, also referred to as thermal chambers, are an important component in quality assurance in many industries and play a crucial role in the assessment of quality, reliability and performance of products and materials under temperature conditions. Many standards require tests under temperature. The innovative temperature chambers from ZwickRoell guarantee a flexible testing system, specifically tailored to customer requirements, for materials and component testing in a load range up to 250 kN and a wide temperature range of -80 °C to +360 °C.
Our temperature chamber for temperatures ranging from -50 °C to +180 °C for small loads up to 2.5 kN provides a cost-effective option with a small footprint.

Applications Videos Advantages & features Technical data Optional accessories

Overview of temperature chambers
250 °C AllroundLine temperature chamber 360 °C AllroundLine temperature chamber zwickiLine temperature chamber
Temperature range -80°C to +250°C -80°C to +360°C -50°C to +180°C
Load range Up to 250 kN Up to 250 kN Up to 2.5 kN
Applications
  • Standard and engineering plastics, e.g. to ISO 527-1 and ASTM D638
  • Elastomers and rubber, e.g. to ASTM D412, ISO 37, ISO 23529
  • Composites only conditionally (e.g., with PA matrix)
  • Standard and engineering plastics, e.g. to ISO 527-1 and ASTM D638
  • Elastomers and rubber, e.g. to ASTM D412, ISO 37, ISO 23529
  • Composites (e.g. also with PEEK matrix and PTFE matrix)
  • Tensile test on metals at elevated temperature ISO 6892-2, ASTM E21
Cost effective option for tensile, compression and flexure tests with low loads and a small footprint
Number of different sizes
  • 5 sizes for optimal alignment to the application
  • 1 size
  • Test area (HWD): 900 x 460 x 740 mm
  • 1 size
  • Test area (HWD): 350 x 250 x 250 mm
Extensometer type and arrangement
  • Arrangement rear left
  • One feedthrough
  • Mechanical insert for sensor arm extensometers or glass insert for optical extensometers
  • Arrangement left or right
  • 4 feedthroughs
  • Mechanical inserts for sensor arm extensometers or glass inserts for optical extensometers
  • Flexible use of different clip-on extensometers in the chamber
Door-in-door
  • Available as an option
  • Included as standard
./.

 

Applications of the -80 °C to +360 °C temperature chamber

All system components used with the temperature chambers made by ZwickRoell are seamlessly compliant with each other. With the use of our testXpert testing software, operation of all system functions is ergonomic and intuitive. All data can be traceably documented with the test series. The temperature chamber is optimally integrated in the world of ZwickRoell extensometers. Reliable test results are guaranteed for both optical and sensor arm measurements. Our modular design allows optimum adaptation of the chamber to suit your needs. The large volume capacity of the chamber allows additional test area space for components testing.

Our temperature chambers up to +360 °C for the AllroundLine materials testing machine with a load range up to 250 kN are universal chambers that can be used for the following applications:

Applications for standard and engineering plastics

This thermal chamber, including all system components, covers the full temperature range for all standard and engineering plastics. Reliable test results, e.g. to ISO 527-1 and ASTM D638 are therefore guaranteed .

  • For example, you can measure plastics with pronounced yield strength with high precision using the videoXtens or the makroXtens and you can switch the crosshead travel measurement completely automatically without opening and closing the door.
  • If you need large measurement travel distances for plastics without pronounced yield point, an optical and mechanical version with lightXtens and longstroke extensometer is also available.

Applications for elastomers and rubber

The thermal chamber, including all system components, also covers the full temperature range for rubber and elastomers.

  • Large measurement travel distances for elastomers and rubber are handled with the lightXtens or the longstroke extensometer, giving you the flexibility of using optical or sensor arm measurements.
  • Standard compliant testing and temperature accuracy are ensured, for example, in accordance with ISO 23529, ISO 37 and ASTM D412.

Applications for composites

The temperature chamber, including all system components, covers the temperature range for most types of composites.

  • For composites with PEEK matrix for example, the temperature chamber up to 360 °C is suitable with corresponding specimen grips and tools.
  • We offer a comprehensive test tool portfolio for composites testing, which can be flexibly used with the temperature chamber.

Composites applications and test tools

Temperature chamber -50 °C to +180 °C up to 2.5 kN

One of our temperature chambers was specially designed for use with a zwickiLine materials testing machine to provide a cost-efficient option for small loads up to 2.5 kN and with a small footprint. You can use it to perform tensile, compression and flexure tests at specified temperatures within a range of -50 °C to +180 °C.

  • Cost-efficient temperature chamber with industrial standard Eurotherm controller
  • Equipped with RS 232 interface for operation with PC as standard
  • Ergonomic, CE-compliant design for simple, safe, and reliable operation
  • Flexible use of different clip-on extensometers
  • Easy removal of the temperature chamber

Advantages and features

Advantages and features

Reliable test results
Cost and time savings
Flexible in use
Maximum operating convenience
Precise temperature conditioning

Reliable test results

 

Material or component characteristics are determined with the highest level of accuracy and in compliance with the standards. The
smallest test details become visible due to the unsurpassed measuring accuracy of this testing system.

  • The temperature chamber ensures accurate measurements with load cells and extensometers. Thanks to the innovative fan concept, characteristic values are free from influences caused by vibrations and convection.
  • Proper test performance can be easily demonstrated to customers and auditors. When combined with the testXpert testing software, the test results are repeatable and settings are traceable. Recording of the temperature sequence starts during the heating phase.
  • The position of the optical extensometer remains unaltered when changing to tests at ambient temperature by simply sliding the temperature out via guide rails.

Cost and time savings

 

State of the art technology guarantees maximum specimen throughput with minimal energy use:

  • The particularly high heating and cooling performance at low LN2 and power consumption lowers operating costs. In some cases, LN2 costs can be cut in half when compared to standard market solutions.
  • Specimen changes through the door-in-door minimize temperature losses and ice formation, significantly increasing specimen throughput.

Flexible in use

 

Based on its modular concept, the temperature chamber can be optimally adapted to your requirements.

  • Four lateral interfaces allow for the connection of several extensometers (optical and sensor arm) or a handling system for automated tests.
  • If the range of application needs to be extended, all options can be retrofitted on-site as required.
  • The large volume of the chamber also provides sufficient space for components testing and ensures consistent temperatures around the specimen.
screen-de

Maximum operating convenience

 

The intuitive, fast, and workflow-based operation of all system components is guaranteed through our ZwickRoell testXpert testing software. By
loading the test program, the testing system including the temperature chamber is fully configured, in a traceable and operator-independent manner. All safety settings and tool distances are automatically set correctly, which ensures reliable test results and optimal protection for the user and testing system.

  • Through uniform operation of all products via testXpert, training efforts are reduced to a minimum.
  • testXpert allows you to automatically approach different force, strain and temperature levels in several sections.
  • With testXpert you can conveniently adjust the fan speed of the temperature chamber, ensuring reliable test results even with fragile specimens such as films.
More information on testXpert testing software

Precise temperature conditioning

 

The temperature chamber achieves extremely homogeneous and accurate conditions for the specimens throughout the entire volume of the chamber. This ensures the accuracy and repeatability of the test results.

  • The sophisticated air-feed system combined with precise and extremely stable temperature control guarantee spatial homogeneity and temporal stability of +/- 1 °C.
  • The optional close-proximity temperature sensor enables temperature control at the critical sensor location, for optimum test results. The practical holder allows fast and precise positioning of the sensor.

Do you have any questions regarding our products?

Please feel free to contact our product experts.
We look forward to discussing your needs.

 

Contact us

Technical overview of the different temperature versions

Optional accessories for temperature chambers

Optional accessories for temperature chambers

Door-in-door safety door function
Specimen magazine with insertion aid
Temperature control near the specimen
Door-in-door principle

Door-in-door safety door function

  • With the door-in-door concept, specimen changes or removal of a clip-on extensometer are very convenient, even at 360 °C. The heat is optimally shielded and the operator is protected. Minimal temperature variation results in shorter cycle times, reduced operating costs and reduced ice formation when in cooling mode.
  • The safety door function guarantees operator safety in accordance with European safety regulations, where the chamber door acts as a safety door with guard locking.
Specimen magazine with insertion aid

Specimen magazine with insertion aid

Start your test well-prepared

Fast, precise specimen change with the ZwickRoell specimen magazine – pre-heat or pre-cool your specimens in the temperature chamber. You can optimally align the specimen to the tensile axis using the corresponding insertion aid. The supplied insulation plate offers maximum comfort so you can use the magazine outside of the chamber.

Standard specimen magazines in our product range: to ASTM D638 Type I, ISO 527-2 Type 1A, ISO 527-2 Type 1B, ISO 527-2 Type 1BA, ISO 527-2 Type 1BB, ISO 6892-1 Type 1, ISO 6892-1 Type 2, ISO 37 Form 1, ISO 37 Form 1A, ISO 37 Form 2, ISO 37 Form 3, ISO 37 Form 4

Temperature control near the specimen

Temperature control near the specimen

Very close to the specimen

The optional close-proximity temperature sensor enables temperature control at the critical sensor location, for optimum test results. The practical holder allows fast, precise sensor positioning.

Totally uniform, extremely accurate temperature control (+/- 1°C) ensures that your specimen is always at exactly the right temperature.

Do you need it to be colder or hotter?
Are you faced with new challenges for your temperature chamber?


We can adapt it to your requirements! Take advantage of our development engineers' many years of experience in implementing customized (in many cases industry-specific) solutions.

Request a consultation

Related products for a customized testing system

Downloads

Name Type Size Download
  • Product information: Temperature chamber for the AllroundLine PDF 1 MB
  • Product Information: Temperature chamber for the AllroundLine up to 360 °C PDF 876 KB
  • Product Information: Temperature chamber for the zwickiLine PDF 108 KB
Top