roboTest P Robotic Testing System

For Automated Tensile Tests and Complex Test Tasks on Metals

The roboTest P (portal) robotic testing system is used for fully automated tensile tests on metal specimens (e.g. to ISO 6892).

roboTest P Robotic Testing System

Key Advantages and Features


  • The system is suitable for materials testing machines from 5 kN to 2000 kN.
  • Several materials testing machines can be used in one system
  • For manual tests, the specimen gripper can be driven to the side, making the materials testing machine accessible to the operator.
  • An industrial controller with autoEdition3 automation software controls the system.
  • Optional components including a barcode reader, cross-section, hardness and roughness measuring devices, disposal gripper, layer thickness measuring device, scales, etc. complete the system.

Advantages & Features

  • Operator influences (hand temperature/moisture, off-center or angled specimen insertion etc.) are eliminated for high test result reproducibility
  • Qualified laboratory staff are relieved of routine activities, making them available for more complex tasks
  • Machine can be used during idle times (lunch breaks and night shifts), which utilizes the full capacity and produces faster results
  • Testing system reduces the testing costs per specimen and typically pays for itself within one to two years
  • System allows for reliable documentation and statistical long-term monitoring



Robotic testing system for heavy plate up to 50 mm

roboTest P robotic testing system with 2000 kN and 600 kN testing machines for tensile tests on heavy plate