Jump to the content of the page

Testing of Corrugated Board and Solid Board

Benefit from our technology leadership in tests of corrugated containerboard, corrugated cardboard and solid boards and their associated products.

Important tests on cardboard

Testing machine with 4 measurement axes

Our static materials testing machines are designed for universal application. This makes it easy to implement individually tailored testing solutions in addition to our standard solutions.

With our AllroundLine materials testing machine with four measuring axes, all relevant tests for predicting the compression strength of cardboard can be determined in a single machine, and various tests can be performed in paper testing In this example,

  • the ECT, FCT, CMT and RCT crush tests are performed in the upper test area.
  • In the lower test area (from left to right), the SCT, the tensile test, and the 4-point flexure test are performed.
  • Expansion options through additional slots, extensometers, safety doors and other accessories.

Interested? Please contact us!
Contact us

The most important tests in the corrugated board and solid board sector

2-point flexure test / quality of creasings
ISO 2493-1, DIN 53121, ISO 5628, DIN 55437-3, DIN 19304
to 2-point flexure test / quality of creasings
3-point flexure test on paper and cardboard
About factory standards
Solid board, paper-based composites and reel cores
to 3-point flexure test on paper and cardboard
Buckling resistance of corrugated board
DIN 54608
to Buckling resistance of corrugated board
4-Point flexure test on corrugated board
DIN 53121, ISO 5628
to 4-Point flexure test on corrugated board
Box crush test / stacking crush test on corrugated boxes & folding cartons
DIN EN ISO 12048, TAPPI T 804
to Box crush test / stacking crush test on corrugated boxes & folding cartons
Edge crush test (ECT) on corrugated board
DIN EN ISO 3037, TAPPI T 811
Strength of the corrugated board
to Edge crush test (ECT) on corrugated board
Flat crush test (FCT) on corrugated board
DIN EN ISO 3035, TAPPI T 825
to Flat crush test (FCT) on corrugated board
Puncture Test on Corrugated Cardboard
DIN 53142-2
to Puncture Test on Corrugated Cardboard
Burst test on heavy corrugated board
ISO 2758
to Burst test on heavy corrugated board
Test creasings, cardboard
DIN 55437-1
Accurate determination of the setting parameters for creasing units (creasing knife width, creasing groove width, creasing depth)
to Test creasings, cardboard
Name Type Size Download
  • Industry brochure: Paper & Cardboard PDF 4 MB
Top